banner

SUBMERSIBLE PUMPS WITH POLYCARBONATE IMPELLERS 4''

Elettropompe centrifughe sommerse per pozzi da 4'
Centrifuge submersible pump for well of 4'
COSTRUZIONE
Sono elettropompe centrifughe sommerse per pozzi da 4”, con
giranti radiali o semiassiali, collegate al motore tramite supporto
d’aspirazione e giunto meccanico, secondo norme NEMA.
Il corpo pompa è serrato mediante tubo di acciaio inox.
- Valvola di non ritorno inserita nel corpo di mandata
- Supporto di aspirazione e corpo di mandata in ghisa Grigia,
esecuzione speciale in acciaio inox
- Boccola di guida albero in lexan caricato
- Anelli di usura guida albero e guida giranti particolarmente
studiati per la lubrificazione e resistenza alle infiltrazioni di
sabbia
- Albero ampiamente dimensionato in acciaio inox
- Protezione cavo di alimentazione e griglia di aspirazione in
acciaio inox
- Anelli paracolpi per la protezione delle parti idrauliche in
fase di avviamento in acciaio inox
IMPIEGHI
Adatta per impianti idrici di approvvigionamento e
pressurizzazione da pozzi profondi in impieghi:
- Sistema di rifornimenti idrici per usi civili ed industriali
- Irrigazione a pioggia ed a scorrimento
- Impianti automatici antincendio UNI 9490 e 10779
- Impianti di sopraelevazione
- Applicazione industriale varia
LIQUIDI POMPATI
Chiari non aggressivi, non esplosivi e privi di sostanze solide
e fibrose.
DATI DI FUNZIONAMENTO
Pompa
- Portate fino 21 m3/h
- Prevalenze fino a 413 m
- Diametro massimo di ingombro 98 mm
- Massima profondità di immersione 150 m
- Massima quantità di sabbia 25 g/m3
- Temperatura liquido pompato max +30 °C
- Installazione verticale orizzontale e obliquo
- Attacco filettato G 1 1/4 serie R, G 2 serie S
- Senso di rotazione antiorario visto dalla mandata
Motore
- Di tipo asincrono a due poli raffreddato ad olio
- Flangia attacco NEMA da 4”
- Tensione monofase 220 / 240 V, prevedere condensatore
sempre inserito
- Tensione Trifase 380 / 415 V
- Frequenza 50 Hz
- Massima deviazione della tensione nominale +6% -10%
- Avviamenti orari Max 30 equamente distribuiti
- Potenza da 0.5 fino a 7.5 kW
- Cavo in dotazione lunghezza da 1.5 m fino a 4 m
- Grado di protezione motore IP 68
- Isolamento classe B
- Protezione motori con relè termico secondo le norme VDE,
classe di scatto (trip) 10 o 10 A / tempo di scatto <10s a="" 5="" xa="" br="">- Per altre caratteristiche dei motori vedere la sezione relativa
in questo stesso catalogo
CONSTRUCTION
These are centrifuge submersible pumps for well of 4”, with
radial or semi-axial impeller, connected to the motor by intake
support and mechanical coupling in accordance with norms
NEMA. Pump body is tightened by tube in stainless steel.
- Check valve put in the delivery body
- Intake support and delivery body in gray iron, special run in
stainless steel
- Ferrule bearing that guides the shaft in lexan affected
- Wear-rings guide shaft and guide impeller particularly studied
for lubrication and resistance to the infiltration of sand
- Shaft amply measured in stainless steel
- Protection of line cord strong and suction screen in stainless
steel
- Buffer rings for protection of the hydraulic parts in starting
stage in stainless steel
USES
Suitable for waterworks of procurement and pressurization by
deep well in uses of:
- System of hydric supplying for civil and industrial uses
- Irrigation at rain and at slip
- Automatic fire fighting plants UNI 9490 and 10779
- Superelevation plants
- Various industrial appliances
PUMPED LIQUIDS
Clear, not aggressive and not explosive, without solid or fibrous
substances
PERFORMANCE DATA
Pump
- Deliveries up to 21 m3/h
- Heads up to 413 m
- Maximum bore crammed 98 mm
- Maximum depth of immersion 150 m
- Maximum quantity of sand 25 gr/m3
- Maximum temperature of pumped liquid +30°C
- Vertical, horizontal and oblique installation
- Threaded connection G 1 1/4 series R, G 2 series S
- Anticlockwise rotation seen from delivery
Motor
- Asynchronous type with two poles, cooled with oil
- Connection flange NEMA of 4”
- Single-phase tension 220 / 240 V, to expect the condenser
always integrated
- Three-phase tension 380 / 415 V
- Frequency 50 Hz
- Maximum deviation of the nominal tension +6% - 10%;
- Maximum hours starting 30 justly distributed
- Power by 0,5 up to 7,5 kW
- Cable in equipment length by 1,5m up to 4m
- Protection’s level of motor IP 68
- Class of segregation B
- Protection motors with thermal relay in accordance to norms
VDE, class of trip 10 or 10 A / time of trip <10 s="" to="" 5="" x="" a="" br="">- For other characteristic of motors, take a look to the